Melco EMT 10T Specifications download pdf (Page 115)

8. Measure the distance from the front of the grabber blade guide to the tip of the

grabber blade. The distance should be 2.5 inches +/- 0.10 as shown in Figure

4-19, item X.

9. To adjust for grabber blade position in Step 8, look to the right side of the

transition bracket just as it enters into the head casting and locate the small set

screw as shown in Figure 4-20.

10. Loosen the set screw in the transition bracket and position the grabber blade so

it is 2.5 inches +/- 0.10 as shown in Figure 4-19, item X.

11. Tighten the set screw in the transition bracket.

12. Replace all covers after making the grabber adjustments.

EMBROIDERY HEAD

RIGHT SIDE VIEW

transition

bracket set

screw

FRONT

HEAD

REAR

HEAD

Grabber

Blade

Figure 4 - 20

Grabber Adjustment 4 - 27

110291-01, Rev D 4. Trimmer Maintenance

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 127 128

No comments

Melco EMT 10T Specifications Page 115