Melco EMT 10T Specifications download pdf (Page 8)

• To indicate that two or more keys must be pressed to obtain a desired

result, each key is indicated with commas between them. An example is:

Press Shift,8 to type an asterisk (*).

Occasionally in the manual, special attention by the user is required. In this

situation, "attention getters" are used to indicate the need for the user to be aware

of a situation that is above and beyond the normal or routine. Three standard

attention getters are explained below:

WARNING!

This term is used to call attention to the user that the procedure

following must be performed with care and accuracy to avoid possible

damage to property or personal injury to the operator or other persons in

the area. This term is also used to announce important regulatory

information.

CAUTION!

This term is used when the procedure following it may cause damage

to the equipment or other property if not properly performed by the user.

NOTE:

This term is used when additional information is required beyond

the normal steps for communicating the information. It may be used to

clarify certain portions of text or to call attention to other items previously

mentioned or mentioned later in the procedure.

Glossary Of Terms

Several words or terms are used in this manual that are unique or specialized in use

with the embroidery industry or Melco embroidery equipment. A glossary of these

terms is located in the operation manual.

Maintenance Philosophy

The maintenance philosophy used in this manual, and practiced at Melco, is to

isolate potential problems within the system to a "practical" replacement assembly.

Therefore, components are typically not repaired, but rather, a circuit board or

mechanical "assembly" may be replaced. In the process of isolating problems in the

machine, the person performing the trouble shooting must also practice good

trouble shooting techniques. Good trouble shooting techniques include, but are not

limited to, guarding against static electricity causing further damage to machine

components; and only replacing one part at a time to enable identification of the

defective part after the machine is repaired.

1 - 2 Maintenance Philosophy

EMT 10T Technical Manual Melco Embroidery Systems

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 127 128

No comments

Melco EMT 10T Specifications Page 8